Replace Rear Fog Lamp Ertiga Suzuki, Make Extra Holes

If you look at the display of the rump Suzuki Ertiga, there still seems incomplete parts installed. Absolutely, because the middle-lower bumper, there are additional holes that can be used as a warning lamp holder for the rider behind. In thick fog when she was down or when the heavy rains, like those found on standard rear bumper Suzuki Splash (Fig.1).

Is said to be used as a rear fog lamp holder, because the available slots on the rear bumper is designed Ertiga temporary alias models are not patent. For his cover is easily removed by opening the clip penguncinya, and cut the plastic rod holder.

Installation of additional rear fog lamp has been acted Gutta Erlich, owner of the low MPV is the latest from Suzuki. According to him, he was inspired to use the rear fog lights, after viewing a congenital Splash bumper.

For those interested to apply, simply capitalized, rear fog lamp belongs to Splash, which can be purchased at authorized service station network of Suzuki with a tag of around Rp 200 thousands. The following dimensional design was designed plug and play, without having to modify the additional slots are already available on the standard bumper Ertiga (Fig.2).

Installation is also easy. After opening an additional slot cover on the rear bumper Ertiga, insert the cable's innate mica Splash fog lamps are already available through the holes in holes in the holder. It also would make it looks neater when installed (Figure 3).

According to the Wira Sentosa from SACS in Jl. Pondok Gede No highway. 24, Jakarta, there are two options for installation that can be applied. "One can directly connect the cable to the power inherent rear fog lamp small lamps or brake lights. It only takes about 30 minutes," explained the guy who successfully apply it to the Gutta's made it.

The second option, Wira-up, can be made a separate model with small lights or brake lights. However, the cable must be pulled forward and should be made an additional button or switch on the dash, to turn on or turn off the rear fog lights as needed.

Finished wiring affairs, do not forget to install the lock nut holder mica two fog lights use 10-inch wrench. Must fasten from the inside of the bumper and make sure more mur be securely installed on the bolt (Figure 4).